/Deterministic Robotic E-Skin Networks

Deterministic Robotic E-Skin Networks

Gent | About a week ago

Reimagining Ethernet TSN as the nervous system technology for future robotic e-skins, enabling distributed sensing, local reflexes, and deterministic intelligence on flexible/stretchable electronic substrates.
Future robots are expected to become highly sensorized systems in which tactile, force, proximity, temperature, acoustic, and motion sensing are distributed across large portions of the robot body. The emerging concept of e-skin envisions thousands of sensing elements integrated on flexible/stretchable electronic substrates (flex-PCB [1], stretchable circuits [2]), combined with local computation and actuation, and interconnected to a communication backbone. Existing robotic communication architectures are not designed for such dense, distributed, and highly dynamic sensing systems.
 

Today, Ethernet and Time-Sensitive Networking (TSN) are increasingly emerging as key technologies for robotic communication systems. Similar to developments in the automotive sector, robots are adopting zonal architectures in which switched Ethernet networks provide a deterministic communication backbone connecting sensors, actuators, compute modules, and distributed controllers across different parts of the robot [3]. TSN offers important capabilities for such architectures, including time synchronization, bounded latency, traffic prioritization, and reliable delivery of time-critical data. While Ethernet and TSN are well suited for communication between larger robotic subsystems, extending these principles toward highly distributed e-skin platforms is considerably more challenging. At this scale, conventional Ethernet connectivity becomes impractical due to wiring complexity, connector count, power consumption, footprint, and mechanical constraints imposed by flexible electronics. Nevertheless, it would be beneficial to adopt similar communication principles down to this level and transform these electronic structures into a deterministic distributed network that behaves as a robotic nervous system, supporting synchronized sensing, local reflexes, and predictable data exchange. Such an approach could unify communication across the entire robotic system and provide an alternative to today's fragmented set of local interconnect technologies.

This raises a fundamental research question: how can the deterministic communication principles that make TSN attractive at the robot level be preserved within highly distributed e-skin networks? New communication architectures are required that bridge the gap between the robot-wide Ethernet backbone and the dense networks of sensors and embedded intelligence within e-skin platforms. Such architectures must efficiently support distributed sensing, local processing, synchronization, and sub-millisecond reflex actions while remaining compatible with the constraints of flexible electronics and large-area integration technologies.

This PhD will investigate whether deterministic networking principles inside a robot can be extended down to the distributed robotic nervous systems implemented on flexible/stretchable electronic substrates. Particular attention will be given to the physical realization of such networks on flexible/stretchable electronics, including design, material stack selection and fabrication, electromagnetic modelling, mechanical modelling, signal integrity analysis, and communication channel characterization to understand the impact of large-area interconnects, flexible/stretchable substrates, and dense sensor integration on deterministic communication performance. The research will combine flexible/stretchable electronics design, flex-PCB design, electromagnetic and communication-channel modelling, network architecture design, embedded processing, and experimental validation through robotic e-skin demonstrators. The work will closely interact with imec's activities on flexible electronics, large-area electronics, robotic e-skin technologies, and deterministic networking.

Objectives:
 
  • Analyze the communication, synchronization, power distribution, and integration requirements of future robotic e-skins comprising distributed sensing, local processing, and actuation elements embedded in flexible electronic substrates.
  • Design a hierarchical robotic nervous-system architecture that seamlessly connects robot-wide Ethernet TSN networks with dense e-skin sensing and actuation fabrics.
  • Develop novel communication architectures and protocols that provide deterministic latency, synchronization, and scalability within and across e-skin tiles while respecting the constraints of flexible electronics.
  • Investigate the physical-layer realization of distributed e-skin networks through electromagnetic modelling, signal-integrity analysis, communication-channel characterization, and power-distribution network design for large-area flexible electronic substrates.
  • Design and optimize flex-PCB and flexible/stretchable electronic architectures integrating sensors, communication interfaces, embedded processing, and power delivery on conformable substrates.
  • Investigate communication-compute co-design approaches enabling local reflexes, distributed intelligence, and efficient aggregation of multimodal sensor data.
  • Experimentally validate communication architectures and electronic designs through prototype e-skin tiles and multi-tile demonstrators integrated with Ethernet TSN robotic backbones.
 
Expected Results:
 
  • A novel flex-PCB architecture for deterministic robotic nervous systems.
  • Communication protocols and synchronization mechanisms supporting deterministic operation, local reflexes, and scalable integration of large numbers of sensing nodes.
  • Flex-PCB and flexible/stretchable electronic designs integrating sensing, communication, processing, and power distribution in conformable e-skin platforms.
  • Design guidelines and models for scalable e-skin electronics, including routing strategies, tile architectures, connector solutions, and reliability under mechanical deformation.
  • Prototype e-skin tiles demonstrating integrated sensing, local intelligence, deterministic communication, and robot-level interoperability.
  • Experimental evaluation of performance, latency, synchronization accuracy, energy consumption, scalability, and mechanical robustness of the proposed architectures.
  • Scientific publications, demonstrators, and intellectual property at the intersection of flexible electronics, deterministic networking, and robotic sensing systems.
 
 

[1] https://www.allpcb.com/blog/pcb-design/designing-flexible-pcbs-for-robotics-applications-advantages-and-challenges.html
 

[2] Ohmae Hideki, Tomita Yoshihiro, and Kasahara Mitsuhiro, Schram Jeroen, Smits Edsger, and van den Brand Jeroen, Bossuyt Frederick, Vanfleteren Jan, and De Baets Johan, (2015), 9.4: Stretchable 45 × 80 RGB LED Display Using Meander Wiring Technology, SID Symposium Digest of Technical Papers, 46, doi: 10.1002/sdtp.10298.
 
[3] Cui, Chengyu, Chulsun Park, and Sungkwon Park. 2023. "Physical Length and Weight Reduction of Humanoid In-Robot Network with Zonal Architecture" Sensors 23, no. 5: 2627.


 


 

Required background: Electrical Engineering

Type of work: 30% modeling/simulation, 60% experimental, 10% literature

Supervisor: Sam Lemey (IDLAB/UGent)

Co-supervisor: Jeroen Hoebeke

Daily advisor: Frederick Bossuyt

The reference code for this position is 2027-062. Mention this reference code in your application.

Who we are
Accept marketing-cookies to view this content.
Cookie settings
imec inside out
Accept marketing-cookies to view this content.
Cookie settings

Related jobs

Hardware Security Researcher

Join imec as Hardware Security Researcher to advance hardware security at the forefront of semiconductor innovation.

Physical ASIC Design Implementation Engineer - Naples, IT

We are looking for multiple Physical ASIC Design Implementation Engineers to strengthen our Physical Digital Implementation Group, in Naples. One of the positions is aimed at a more senior profile, who will take on a technical lead role in larger projects. You will work on full b

R&D Team Leader – Silicon Photonics PDK

Help shape imec's silicon photonics design platforms. Lead the development, maturation and delivery of process design kits (PDKs) that translate advanced photonics technologies into robust, scalable and easy-to-use design platforms.

Design of Neuromorphic Mixed-Signal Integrated Circuits for Multi-Analyte Implantable Biosensor Arrays

Enabling ultra-low-power, real-time biochemical sensing through integrated neuromorphic intelligence

6G-Enabled Distributed Intelligence for Humanoid Robotics: Joint Computing and Connectivity across Robot and Environment (Edge)

Explore how 6G connectivity can extend humanoid intelligence beyond the robot by dynamically distributing computing between the robot and its environment.

Backside integrated charge pump technology for high-current-density AI applications

Hand-in-hand with technology developers at imec you will design a charge pump using backside power delivery technology to solve the bottleneck in the delivery of the high currents that AI chips need
Job opportunities

Send this job to your email