/Energy-dependence of the non-Rutherford scattering of protons on C and Mg

Energy-dependence of the non-Rutherford scattering of protons on C and Mg

Master projects/internships - Leuven | About a week ago

Advance technology by developing new insights 

The cross section (probability) of elastic scattering of certain projectiles at specific high energies on the atoms of a target deviates considerably from the Rutherford formula. This phenomenon is sometimes used to enhance the sensitivity to certain elements, as is needed for the advanced characterization of nanometer scale components. However, as you will show in this Master thesis project, it can also be exploited to improve calibrating the voltage of the accelerator.

Colaux et al. [1] pioneered a new method to calibrate the voltage of an accelerator by using the elastic non-Rutherford backscattering reaction 16O(α, α)16O resonance centered around 3038.1 keV. It relies on the fitting of an experimental spectrum via a simulation software to obtain a fitted energy which in theory represents the "true" energy of the beam. By comparing this energy to the one derived from the terminal voltage, the accelerator can be calibrated. This technique is accurate, but much quicker than more elaborate methods since the calibration can be carried out with a single measurement. However, the required energy is not attainable with many accelerators, and the used software is case-specific and not readily available.

We will investigate elastic non-Rutherford resonances other than 16O(α, α)16O at 3038.1 keV with the aim of calibrating the Van de Graaff accelerator in the Leuven ion-beam center (maximum voltage 2500 kV). We will study the resonances in the scattering cross section of protons on carbon and magnesium, as they are intense and hold great promise for this purpose [2]. The recorded non-Rutherford spectra will be analyzed with a new release of the Ruthelde software which allows the accelerator voltage as a free parameter [3].

You will investigate the applicability and attainable accuracy of the resonances for the voltage calibration. As such this study will establish a new method to calibrate the voltage of an electrostatic accelerator with can reach energies from 500 keV up to 2.5 MeV.

[1] J.L. Colaux, et al. “On the traceably accurate voltage calibration of electrostatic accelerators”. In: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 349 (2015), pp. 173– 183.

[2] AF Gurbich. “SigmaCalc recent development and present status of the evaluated cross-sections for IBA”. In: Nuclear Instruments and Methods in Physics Research Section B 371 (2016), pp. 27–32.

[3] R. Heller, N. Klingner, N. Claessens, C. Merckling and J. Meersschaut, “Differential evolution optimization of Rutherford backscattering spectra”. In: Journal of Applied Physics 132 (2022) 16.

 

Master's degree: Master of Science

Required educational background: Physics, Nanoscience & Nanotechnology

University promotor: Stefan De Gendt (Chemistry, Nano)

For more information or application, please contact the supervising scientist Johan Meersschaut (johan.meersschaut@imec.be).

 

Imec allowance will be provided for students studying at a non-Belgian university.

Who we are
Accept marketing-cookies to view this content.
Cookie settings
imec inside out
Accept marketing-cookies to view this content.
Cookie settings

Related jobs

R&D Thin Films Engineer

You will investigate, develop, and optimize complex ONO stacks for innovative memory architectures to enable future advancements in Artificial Intelligence.

Annealing and Diffusion Engineer

You will support annealing processes across logic and memory applications as well as to follow research of activation anneal and diffusion phenomena at the nanoscale and identify the challenges and propose solutions for future technology nodes.

R&D Engineer Wet Etch and Clean

Dry and wet processing such as isotropic etching, cleaning and surface functionalization processes play a vital role in the semiconductor industry, spanning various stages such as Front, Middle, Back, and far Back-end-of-line (3D).

Nano-engineered diamond tip chips for advanced imaging and data analysis applications in reverse-tip-sample scanning probe microscopy

Learn how to make and evaluate sharp and conductive diamond tip structures for nanoscopic electrical measurements.

Data-driven quantification of crystal quality in advanced semiconductor devices by electron microscopy (NNFC internship only)

Are you fascinated by the atomic-scale world and eager to push the boundaries of materials characterization? Join imec’s Materials and Component Analysis (MCA) team and discover how advanced transmission electron microscopy (TEM) can reveal the secrets of novel materials and arch

N2/A14 Gate-leakage and second-order effects | N3/N5 FF CM Calibration

Advance nodes compact model improvement, development and calibration for post finfet era 
Job opportunities

Send this job to your email